Choke Tubes for Browning Invector DS

Browning Invector DS Bone Collector™ Turkey Choke Tube

THE OFFICIAL CHOKE TUBE OF BONE COLLECTOR™

Carlson’s Ported Bone Collector™ Turkey Choke Tubes feature a super tight, pattern tested constriction that throws extremely tight patterns with all shotshell ammunition loaded for turkey hunting including lead, nickel-plated, copperplated, bismuth, hevi-shot, tungsten, and TSS. A longer taper section to the constriction (parallel section of choke tube) insure tight patterns with less flyers.  More pellets on target every shot!  The Bone Collector Choke tubes are precision-machined from 17-4 heat treated stainless steel and feature a non-reflective matte black finish. Each choke tube constriction has been pattern tested and has thrown the best patterns with 4 through 10 shot. If you wish to use shot size’s larger than #4 shot, use a more open choke tube for optimum patterning. Remember to pattern your shotgun choke tube with the specific shot shell load you are going to be using. Different types and manufacturers of ammunition will throw different patterns from the same choke tube.

Do not use any steel shot larger than #4, slugs, sabots, rifled slugs, & 00/000 buckshot through a Carlson’s Turkey Choke.

Browning Invector DS Carlson's TSS Turkey Choke Tubes

Carlson's TSS Turkey Choke Tubes are optimized for Federal Premium® Heavyweight® TSS Turkey Loads but also work exceptionally well with other manufacturer's turkey ammunition (Smaller shot size 7-9). The Federal Premium's Heavyweight TSS Turkey Load has an incredibly high pellet count in both 7 and 9 shot, along with the ability to carry energy further, makes them ideal for 12 and 20 ga. Tungsten Super Shot (TSS) has a 22% heavier density than heavyweight shot and a 56% heavier density than traditional lead shot. It puts the maximum amount of pellets possible in a 10” circle at 40 yds. The 12- and 20-ga. shells will include the FliteControl Flex™ wad that gives hunters the ability to shoot any choke tube they prefer. Long-range turkeys don't stand a chance.

*No Steel Shot Larger than #4 may be used in our Turkey Choke Tubes

Browning Invector DS Long Beard Turkey Choke Tubes

New for 2016! Carlson's Long Beard Turkey Choke! This choke tube has been specially designed to produce the best patterns when shooting Winchester's New Long Beard Turkey loads. This new ammunition features Shot-Lok Technology that allows for the tightest patterns and longer downrange reach over any lead turkey load on the market. Pair this ammunition's capabilities with the new Carlson's Long Beard Turkey Choke and you have a devastating, gobbler-killing combination.

This tom-dropping dynamic duo serves-up 10% greater penetration over standard lead shot at distances of more than 50 yards, terminal on-target performance and allows nearly perfectly round shot to be thrown from the barrel for extremely tight, long-range patterns.

When you head to the turkey woods, give yourself better reach and down-range performance by using Carlson's Long Beard Turkey Choke with your Winchester Long Beard Shotgun Loads. It's a killer combination that's sure to drop that big old gobbler when the music stops.

*No Steel Shot Larger than #4 may be used in our Turkey Choke Tubes

Carlson's Choke Tubes are backed by a LIFETIME WARRANTY and MADE IN THE USA!

Browning Invector DS Extended Turkey Choke Tubes

Our Invector DS tubes are manufactured from 17-4 heat treated stainless steel to withstand heavy buffered turkey shotshells. These choke tubes produce extra tight patterns with copper plated and buffered lead turkey shotshells. These chokes produce dense patterns and carry a lifetime warranty. The Extended Turkey Chokes extend approximately 1" from the end of the barrel. These chokes have a matte blue finish.

*No Steel Shot Larger than #4 may be used in our Turkey Choke Tubes

We have found the .665 Extended Turkey Choke Tube to produce the most consistent patterns with turkey loads.

Browning Invector DS Cremator Ported Waterfowl Choke Tubes

Carlson’s Cremator® Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation, less flyers and more dense patterns. These benefits make the Cremator® Series extremely effective on all types of waterfowl throughout the entire season.

The Cremator® series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube, including a 25% longer parallel section for tighter and more dense patterns, wrench-less installation, quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator® Series Choke Tubes are made in the U.S.A.,  carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.

Browning Invector DS Cremator Non-Ported Waterfowl Choke Tubes

Carlson’s Cremator® Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation, less flyers and more dense patterns. These benefits make the Cremator® Series extremely effective on all types of waterfowl throughout the entire season.

The Cremator® series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube, including a 25% longer parallel section for tighter and more dense patterns, wrench-less installation, quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator® Series Choke Tubes are made in the U.S.A.,  carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.

Browning Invector DS Cremator Ported Snow Goose Choke Tubes

Snow Goose Cremator® Choke Tubes are coated in white Cerakote® that offers a low-glare, industry leading corrosion, abrasion and chemical resistant protective coating - and a custom look.

Carlson’s Cremator® Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation, less flyers and more dense patterns. These benefits make the Cremator® Series extremely effective on all types of waterfowl throughout the entire season.

The Cremator® series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube, including a 25% longer parallel section for tighter and more dense patterns, wrench-less installation, quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator® Series Choke Tubes are made in the U.S.A.,  carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.

IF OUT OF STOCK AND WANTING TO ORDER A SPECIALTY SNOW GOOSE CHOKE TUBES PLEASE CALL 785-626-3700

Browning Invector DS Cremator Non-Ported Snow Goose Choke Tubes

Snow Goose Cremator® Choke Tubes are coated in white Cerakote® that offers a low-glare, industry leading corrosion, abrasion and chemical resistant protective coating - and a custom look.

Carlson’s Cremator® Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation, less flyers and more dense patterns. These benefits make the Cremator® Series extremely effective on all types of waterfowl throughout the entire season.

The Cremator® series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube, including a 25% longer parallel section for tighter and more dense patterns, wrench-less installation, quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator® Series Choke Tubes are made in the U.S.A.,  carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.

IF OUT OF STOCK AND WANTING TO ORDER A SPECIALTY SNOW GOOSE CHOKE TUBES PLEASE CALL 785-626-3700

Browning Invector DS Delta Waterfowl 3-Pack Set

CLOSE-RANGE, MID-RANGE, & LONG RANGE CHOKE TUBES WITH CASE

Our Waterfowl Extended Choke Tubes are manufactured from a tough, high grade stainless steel to withstand steel shot, Hevi Shot, and other heavy tungsten shot.  Due to the thin wall design of the Optima HP choke system, we had to use a tougher material in the Mid Range & Extended Range tubes so that you don't have to worry about the choke tube swelling and sticking in the shotgun's barrel. These choke tubes feature a 25% longer parallel section in the choke, thus throwing more consistent patterns. Each choke tube is knurled on the end to allow for quick and easy removal. Each choke tube has the constriction and size laser marked on the end and body for easy reference.

Steel shot may be used through these choke tubes with exceptional results. Do not shoot steel shot larger than BB or any steel load faster than 1550 FPS through the Full or Extra Full Constrictions.
Slugs, sabots, and rifled slugs are not to be used in any choke constriction tighter than Improved Cylinder. Remember to pattern your shotgun choke tube with the specific shotshell load you are going to be using. Different brands of ammunition throw different patterns from the same choke tube.

This choke is backed by Carlson's lifetime waranty.

Browning Invector DS Delta Waterfowl 2-Pack Choke Tubes

MID-RANGE, & LONG RANGE CHOKE TUBES
Our Waterfowl Extended Choke Tubes are manufactured from 1704 stainless steel and designed to throw tighter and denser patterns than conventional choke tubes. These choke tubes feature a 25% longer parallel section in the choke, thus throwing more consistent patterns. Each choke tube is knurled on the end to allow for quick and easy removal. Each choke tube has the constriction and size laser marked on the end and body for easy reference.
Steel shot may be used through these choke tubes with exceptional results. Do not shoot steel shot larger than BB or any steel load faster than 1550 FPS through the Long Range Constriction.  Loads that exceed this size and speed should be used with the Mid Range choke tube. These chokes are backed by Carlson's lifetime warranty.

Browning Invector DS Delta Waterfowl Extended Choke Tubes

Our new line of steel shot choke tubes pattern steel shot extremely well. These choke tubes feature a longer parallel section allowing for less flyers and denser patterns. These choke tubes extend 3/4 " outside the barrel eliminating damage to your barrel caused by prolonged steel shot use. The longer parallel section allows for use of larger steel shot in tighter choke constrictions. They are made of 17-4 stainless with a knurled extension and a blue finish. Each choke tube carries a lifetime warranty. All steel shot sizes may be used in the close and mid-range choke tubes. Do not use steel faster than 1550 FPS or steel shot sizes larger than BB through the Long Range choke tube.

• Close Range Extended Steel Shot Choke Tubes - for hunting over decoys, throws tightest pattern up to 35 yards.
• Mid Range Extended Steel Shot Choke Tubes - for those situations where you are shooting 25 to 40 yards.
• Extended Range Steel Shot Choke Tubes - for taking shots 40 yards and up. Our best patterning long range choke tube.

Browning Invector DS Black Cloud Waterfowl Choke Tubes

This choke is backed by Carlson's lifetime waranty.

GET OUTSTANDING RESULTS WHEN YOU USE THE KNOCKDOWN POWER OF FEDERAL PREMIUM'S BLACK CLOUD™ AMMUNITION WITH CARLSON'S NEW TITANIUM COATED BLACK CLOUD CHOKE TUBE

Federal's new Black Cloud ammunition features devastating penetration which can now be delivered with unique features that help downrange performance increasing hunter success.

The Extended tube is constructed of a Titanium-coated steel, and comes in Mid Range and Long Range models. The titanium coating helps the uniquely designed FliteControl Wad in the Black Cloud ammunition perform downrange with less build-up in the choke and allows the Flitestopper shot to do its job this increasing your take in the field.

These chokes are specifically designed to get the most performance from Federal's new Black Cloud Ammunition, but perform extremely well with other steel shotshells. The Long Range choke tube should not be used with any steel shot larger than BB or with any steel shot faster than 1550 fps. The Mid Range model can be used with all steel shot sizes.

The Mid Range model can be used with all steel shot sizes, and with ammunition that exceeds 1550 fps. Black Cloud ammunition has been designed to be used with choke tubes that do not use porting or wad stopping devices.

Browning Invector DS Sporting Clays Choke Tubes

Our Sporting Clays Choke Tubes are made from 17-4 stainless and precision machined to produce a choke tube that patterns better than standard choke tubes. These choke tubes feature a 25% larger parallel section in the choke thus throwing more consistent patterns than conventional choke tubes. Each choke tube is knurled on the end to allow for quick and easy removal. Each choke tube has the constriction laser marked on the end for easy reference. These choke tubes are backed by our lifetime warranty.

Lead shot, Steel Shot, Copperplated Shot, Nickel Shot, Hevi-Shotshells™, and Buck Shot can be used in our Sporting Clay Choke Tubes. Steel shot larger than BB should not be used in any Sporting Clays Choke Tube tighter than Full Constriction. Our Sporting Clays Choke Tubes will throw tighter/denser patterns than Flush Mount Choke Tubes due to a longer parallel section.

Fits Browning Invector-DS 12 gauge Choke System

Browning Invector DS Blued Sporting Clays Choke Tubes

Carlson's Sporting Clays Choke Tubes are made from 17-4 stainless and precision machined to produce a choke tube that patterns better than standard choke tubes. These choke tubes feature a 25% larger parallel section in the choke, thus throwing more consistent patterns than conventional choke tubes. Lead, Copperplated, Nickel Hevi-Shot™, Bismuth, Tungsten or Steel Shot may be used in these choke tubes. For best results, pattern your choke tube with the specific shotshell load you will be using in the field. Different ammunition patterns differently from the same choke tube.

Browning Invector DS Gold Competition Target Ported Sporting Clays Choke Tubes

SPECIALTY CHOKE TUBES CAN TAKE 3-4 WEEKS TO SHIP FROM ORDER DATE (IF OUT OF STOCK BELOW).

Our New Gold Ported Sporting Clays choke reduces recoil and at the same time reducing muzzle jump making follow up shots quick and easy. Manufactured from 17-04 stainless steel and precision machined to produce a choke that patterns better, with less recoil, than standard flush mount choke tubes. These chokes feature a 25% longer parallel section in the choke which allows for tighter, denser patterns, with less flyers another words more pellets on the target. The extended portion of the choke tube allows for quick and easy removal and insertion. Lead, Copperplated, Nickel, Hevi-shot, Bismuth and tungsten may be shot through these choke tubes. When using steel shot do not shoot steel larger than BB through any choke tighter than full. These choke tubes have a Gold finish and carry our full lifetime warranty.

IF OUT OF STOCK AND WANTING TO ORDER A SPECIALTY GOLD COMPETITION TARGET CHOKE TUBES PLEASE CALL 785-626-3700

Browning Invector DS Ported Sporting Clays Choke Tubes

Our New Ported Sporting Clays choke reduces recoil and at the same time reducing muzzle jump making follow up shots quick and easy. Manufactured from 17-04 stainless steel and precision machined to produce a choke that patterns better, with less recoil, than standard flush mount choke tubes. These chokes feature a 25% longer parallel section in the choke which allows for tighter, denser patterns, with less fliers, in other words, more pellets on target. The extended portion of the choke tube allows for quick and easy removal and insertion. Lead, Copperplated, Nickel, Hevi-shot, Bismuth and tungsten may be shot through these choke tubes. When using steel shot do not shoot steel larger than BB through any choke tighter than full. These choke tubes have a blue finish and carry our full lifetime warranty.

Browning Invector DS 16 Yard Trap Choke

Our 16 Yard Trap Choke is manufactured from 17-4 stainless steel and designed to throw tighter and denser patterns over conventional flush choke tubes. These choke tubes feature a 25% longer parallel section in the choke, thus throwing more consistent patterns. Each choke tube is knurled on the end to allow for quick and easy removal. Each choke tube has the constriction and size laser marked on the head and body for easy reference. Steel shot may be used through this choke tube with exceptional results. Do not shoot slugs, sabots, or rifled slugs through the 16 Yard Trap Choke. Remember to pattern your shotgun choke tube with the specific shotshell load you are going to be using. Different brands of ammunition throw different patterns from the same choke tube. The 16 Yard Trap Choke is safe to shoot all Hevi-Shot, Lead, Steel, Copper, TSS, and other non Toxic ammunition.

16 Yard choke tube with .020 constriction
-          Works well out to the 22 yard line trap shooting
-          Exceptional results out to 40 yards when hunting

Browning Invector DS Trap Pak

Carlson’s TRAP PAK takes the guessing game out of trap shooting! This three choke set is easily identified with the appropriate shooting yardage lasered on the extended heads of the choke tubes. Carlson’s exclusive offer includes a 3 choke tube case to keep your choke tubes safe inside your shooting bag. Our TRAP Pak is manufactured from 17-4 heat treated stainless steel and designed to throw tighter and denser patterns than conventional choke tubes. These choke tubes feature a 25% longer parallel section in the choke, thus throwing more consistent patterns. Each choke tube is knurled on the end to allow for quick and easy removal. Each choke tube has the constriction and size laser marked on the end and body for easy reference. Steel Shot may be used through these choke tubes with exceptional results. Do not shoot steel shot larger than BB or any steel loads faster than 1550 FPS through the 27 yard choke tube. Slugs, sabots, and rifled slugs are not to be used in any of these choke constrictions. Remember to pattern your shotgun choke tube with the specific shotshell load you are going to be using. Different brands of ammunition throw different patterns from the same choke tube.
 
16 Yard choke tube with .020 constriction
-          Works well out to the 22 yard line trap shooting
-          Exceptional results out to 40 yards when hunting
 
22 Yard choke tube with .030 constriction
-          Works well out to the 27 yard line trap shooting
-          Exceptional results out to 50 yards when hunting
 
27 Yard choke tube with .035 constriction
-          Works well out to the 27 yard line trap shooting
-          Exceptional results beyond 50 yards when hunting

Browning Invector DS BuckShot Choke Tubes

Our NEW Ported Buckshot choke tube is designed to give you tight patterns downrange with 00 & 000 buckshot.  This choke is ported to reduce recoil and muzzle jump that tend to go hand in hand with these large loads.  This choke features a constriction designed specifically to optimize patterns with large and small loads alike.  This choke will extended about 1” out of the barrel and has a black finish.  Machined out of 17-4 heat treated material this choke can be used with Lead, Steel, and Hevi-Shot loads. This choke cannot be used with any Steel Shot larger than BB or with any Steel shot faster than 1550 FPS.