Choke Tubes for Beretta Optima HP

Choose from a full selection of choke tubes for Beretta Optima HP Shotguns. Every choke we make is backed by a lifetime warranty and is made in the USA!   If you have trouble identifying your Beretta or Benelli Choke, please refer to this page.



PLEASE NOTE: There can be several styles of chokes used by a number of shotgun manufacturers.
Please check our detailed interchange guide to be sure this is the right product for your shotgun.
Click here for that information


Beretta Optima HP Sporting Clays Choke Tubes

Our Sporting Clays Choke Tubes are made from 17-4 stainless and precision machined to produce a choke tube that patterns better than standard choke tubes. These choke tubes feature a 25% larger parallel section in the choke thus throwing more consistent patterns than conventional choke tubes. Each choke tube is knurled on the end to allow for quick and easy removal. Each choke tube has the constriction laser marked on the end for easy reference. These choke tubes are backed by our lifetime warranty. Lead shot, Steel Shot, Copperplated Shot, Nickel Shot, Hevi-Shotshells™, and Buck Shot can be used in our Sporting Clay Choke Tubes. Due to the thin wall design of this choke tube Steel shot cannot be used int eh Modified, IM, Full, or EF constrcitons.  Check out the Extended Super Steel section for tighter constrcitions for use with Steel shot.  Our Sporting Clays Choke Tubes will throw tighter/denser patterns than Flush Mount Choke Tubes due to a longer parallel section.

Beretta Optima HP 12 Gauge Sporting Clays Choke Tubes
Item# Const. Dia. $47.95
65000 Cylinder .733 ADD
65001 Skeet .728 ADD
65002 Improved Cylinder .723 ADD
65003 Light Modified .718 ADD
65004 Modified* .713 ADD
65005 Improved Modified* .708 ADD
65006 Full* .703 ADD
65007 Extra-Full* .693 ADD
* Not for use with steel shot.
Click to Return to top of this page



Beretta Optima HP Blued Sporting Clays Choke Tubes

Our NEW Sporting Clays with a BLACK FINISH are made from 17-4 stainless and precision machined to produce a choke tube that patterns better than standard choke tubes.  These choke tubes feature a 25% longer parallel section in the choke thus throwing more consistent patterns than conventional choke tubes.  Each choke tube is knurled on the end to allow for quick and easy removal or installation.  Each choke has the constriction lasered on the end for easy reference.

These choke tubes may be used with Lead, Copperplated, Nickle, Hevi-Shot, Bismuth, Tungsten, or Steel shot.  Due to the thin wall design of this choke system, steel shot cannot be used in the Modified, IM, Full or EF constrictions.  Check out our Extended Super Steel section for tighter constricitons that can be used with Steel shot.  These chokes are backed by a lifetime warranty.

Beretta Optima HP 12 Gauge Blued Sporting Clays Choke Tubes
Item# Const. Dia. $50.95
75000 Cylinder .733 ADD
75001 Skeet .728 ADD
75002 Improved Cylinder .723 ADD
75003 Light Modified .718 ADD
75004 Modified* .713 ADD
75005 Improved Modified* .708 ADD
75006 Full* .703 ADD
75007 Extra-Full* .693 ADD
* Not for use with steel shot.
Click to Return to top of this page



Beretta Optima HP Trap Pak

Carlson’s TRAP PAK takes the guessing game out of trap shooting! This three choke set is easily identified with the appropriate shooting yardage lasered on the extended heads of the choke tubes. Carlson’s exclusive offer includes a 3 choke tube case to keep your choke tubes safe inside your shooting bag. Our TRAP Pak is manufactured from 17-4 heat treated stainless steel and designed to throw tighter and denser patterns than conventional choke tubes. These choke tubes feature a 25% longer parallel section in the choke, thus throwing more consistent patterns. Each choke tube is knurled on the end to allow for quick and easy removal. Each choke tube has the constriction and size laser marked on the end and body for easy reference. Steel Shot may be used through these choke tubes with exceptional results. Do not shoot steel shot larger than BB or any steel loads faster than 1550 FPS through the 27 yard choke tube. Slugs, sabots, and rifled slugs are not to be used in any of these choke constrictions. Remember to pattern your shotgun choke tube with the specific shotshell load you are going to be using. Different brands of ammunition throw different patterns from the same choke tube.
 
16 Yard choke tube with .020 constriction
-          Works well out to the 22 yard line trap shooting
-          Exceptional results out to 40 yards when hunting
 
22 Yard choke tube with .030 constriction
-          Works well out to the 27 yard line trap shooting
-          Exceptional results out to 50 yards when hunting
 
27 Yard choke tube with .040 constriction
-          Works well out to the 27 yard line trap shooting
-          Exceptional results beyond 50 yards when hunting

Beretta Optima HP 12 Gauge Trap Pak
Item# Const. Dia. $129.95
17212 Mod-Full-EF ADD

Click to Return to top of this page



Beretta Optima HP 16 Yard Trap Choke

Our 16 Yard Trap Choke is manufactured from 17-4 stainless steel and designed to throw tighter and denser patterns over conventional flush choke tubes. These choke tubes feature a 25% longer parallel section in the choke, thus throwing more consistent patterns. Each choke tube is knurled on the end to allow for quick and easy removal. Each choke tube has the constriction and size laser marked on the head and body for easy reference. Steel shot may be used through this choke tube with exceptional results. Do not shoot slugs, sabots, or rifled slugs through the 16 Yard Trap Choke. Remember to pattern your shotgun choke tube with the specific shotshell load you are going to be using. Different brands of ammunition throw different patterns from the same choke tube. The 16 Yard Trap Choke is safe to shoot all Hevi-Shot, Lead, Steel, Copper, TSS, and other non Toxic ammunition.

16 Yard choke tube with .020 constriction
-          Works well out to the 22 yard line trap shooting
-          Exceptional results out to 40 yards when hunting

Beretta Optima HP 12 Gauge 16 Yard Trap Choke
Item# Const. Dia. $50.95
17242 Modified .713 ADD

Click to Return to top of this page



Beretta Optima HP Bone Collector™ Turkey Choke Tube

THE OFFICIAL CHOKE TUBE OF BONE COLLECTOR™

Carlson’s Ported Bone Collector™ Turkey Choke Tubes feature a super tight, pattern tested constriction that throws extremely tight patterns with all shotshell ammunition loaded for turkey hunting including lead, nickel-plated, copperplated, bismuth, hevi-shot, tungsten, and TSS. A longer taper section to the constriction (parallel section of choke tube) insure tight patterns with less flyers.  More pellets on target every shot!  The Bone Collector Choke tubes are precision-machined from 17-4 heat treated stainless steel and feature a non-reflective matte black finish. Each choke tube constriction has been pattern tested and has thrown the best patterns with 4 through 10 shot. If you wish to use shot size’s larger than #4 shot, use a more open choke tube for optimum patterning. Remember to pattern your shotgun choke tube with the specific shot shell load you are going to be using. Different types and manufacturers of ammunition will throw different patterns from the same choke tube.

Do not use any steel shot larger than #4, slugs, sabots, rifled slugs, & 00/000 buckshot through a Carlson’s Turkey Choke.

 

Beretta Optima HP 12 Gauge Bone Collector™ Turkey Choke Tube
Item# Const. Dia. $79.95
80190 Turkey .660 ADD

Click to Return to top of this page



Beretta Optima HP Long Beard Turkey Choke Tubes

Carlson's Long Beard Turkey Choke!  This choke tube has been specially designed to produce the best patterns when shooting Winchester's New Long Beard Turkey loads.  This new ammunition features Shot-Lok Technology that allows for the tightest patterns and longer downrange reach over any lead turkey load on the market.  Pair this ammunition's capabilities with the new Carlson's Long Beard Turkey Choke and you have a devastating, gobbler-killing combination.
This tom-dropping dynamic duo serves-up 10% greater penetration over standard lead shot at distances of more than 50 yards, terminal on-target performance and allows nearly perfectly round shot to be thrown from the barrel for extremely tight, long-range patterns.
When you head to the turkey woods, give yourself better reach and down-range performance by using Carlson's Long Beard Turkey Choke with your Winchester Long Beard Shotgun Loads.  It's a killer combination that's sure to drop that big old gobbler when the music stops.
Carlson's Choke Tubes are backed by a LIFETIME WARRANTY and MADE IN THE USA!

*No Steel Shot Larger than #4 may be used in our Turkey Choke Tubes

Beretta Optima HP 12 Gauge Long Beard Turkey Choke Tubes
Item# Const. Dia. $55.95
70190 Turkey .660 ADD

Click to Return to top of this page



Beretta Optima HP Extended Turkey Choke Tubes

Our NEW Beretta Optima HP (A-400) Extended Turkey Choke tube is extended and has a matte black finish.  It has a .680 constriction and can be used with any lead or Hevi-Shot load.  This chokes is designed to get tight patterns with any turkey load regardless of size of the pellets.  This choke is backed by Carlson's Lifetime Warranty!

These choke tubes feature a longer parallel section allowing for less flyers and denser patterns over the targeted area.  These choke tubes extend ¾” outside the barrel eliminating barrel damage. These choke tubes have a knurled extension and a matte blue finish.  

*No Steel Shot Larger than #4 may be used in our Turkey Choke Tubes

Beretta Optima HP 12 Gauge Extended Turkey Choke Tubes
Item# Const. Dia. $49.95
75008 Turkey .680 ADD

Click to Return to top of this page



Beretta Optima HP Cremator Ported Waterfowl Choke Tubes

Carlson’s Cremator® Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation, less flyers and more dense patterns. These benefits make the Cremator® Series extremely effective on all types of waterfowl throughout the entire season.

The Optima HP Cremator® series has no size or speed restrictions with steel shot in the Close or Mid Range constrictions. The Long Range is limited to no steel shot larger than #2. You also get all the benefits of an extended choke tube, including a 25% longer parallel section for tighter and more dense patterns, wrench-less installation, quick removal and helps with muzzle protection. Like all of our tubes Carlson’s Cremator® Series Choke Tubes are made in the U.S.A.,  carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.

NOTE:  Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.

Beretta Optima HP 12 Gauge Cremator Ported Waterfowl Choke Tubes
Item# Const. Dia. $59.95
11563 Close Range .728 ADD
11565 Mid Range .718 ADD
11567 Long Range .708 ADD
Item# Const. Dia. $104.95
11562 2-Pack .718 & .708 ADD
Item# Const. Dia. $159.95
11569 3-Pack CR-MR-LR in Case ADD

Click to Return to top of this page



Beretta Optima HP Cremator Non-Ported Waterfowl Choke Tubes

Carlson’s Cremator® Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation, less flyers and more dense patterns. These benefits make the Cremator® Series extremely effective on all types of waterfowl throughout the entire season.

The Optima HP Cremator® series has no size or speed restrictions with steel shot in the Close or Mid Range constrictions. The Long Range is limited to no steel shot larger than #2. You also get all the benefits of an extended choke tube, including a 25% longer parallel section for tighter and more dense patterns, wrench-less installation, quick removal and helps with muzzle protection. Like all of our tubes Carlson’s Cremator® Series Choke Tubes are made in the U.S.A.,  carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.

NOTE:  Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.

Beretta Optima HP 12 Gauge Cremator Non-Ported Waterfowl Choke Tubes
Item# Const. Dia. $51.95
11663 Close Range .728 ADD
11665 Mid Range .718 ADD
11667 Long Range .708 ADD
Item# Const. Dia. $92.50
11662 2-Pack .718 & .708 ADD
Item# Const. Dia. $139.95
11669 3-Pack CR-MR-LR in Case ADD

Click to Return to top of this page



Beretta Optima HP Cremator Ported Snow Goose Choke Tubes

Snow Goose Cremator® Choke Tubes are coated in white Cerakote® that offers a low-glare, industry leading corrosion, abrasion and chemical resistant protective coating - and a custom look.

Carlson’s Cremator® Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation, less flyers and more dense patterns. These benefits make the Cremator® Series extremely effective on all types of waterfowl throughout the entire season.

The Optima HP Cremator® series has no size or speed restrictions with steel shot in the Close or Mid Range constrictions. The Long Range is limited to no steel shot larger than #2. You also get all the benefits of an extended choke tube, including a 25% longer parallel section for tighter and more dense patterns, wrench-less installation, quick removal and helps with muzzle protection. Like all of our tubes Carlson’s Cremator® Series Choke Tubes are made in the U.S.A.,  carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.

NOTE:  Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.

IF OUT OF STOCK AND WANTING TO ORDER A SPECIALTY SNOW GOOSE CHOKE TUBES PLEASE CALL 785-626-3700

Beretta Optima HP 12 Gauge Cremator Ported Snow Goose Choke Tubes
Item# Const. Dia. $69.95
11566 Mid Range .718 ADD
11568 Long Range .708 ADD
Item# Const. Dia. $124.50
11561 2-Pack MR & LR ADD

Click to Return to top of this page



Beretta Optima HP Cremator Non-Ported Snow Goose Choke Tubes

Snow Goose Cremator® Choke Tubes are coated in white Cerakote® that offers a low-glare, industry leading corrosion, abrasion and chemical resistant protective coating - and a custom look.

Carlson’s Cremator® Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation, less flyers and more dense patterns. These benefits make the Cremator® Series extremely effective on all types of waterfowl throughout the entire season.

The Optima HP Cremator® series has no size or speed restrictions with steel shot in the Close or Mid Range constrictions. The Long Range is limited to no steel shot larger than #2. You also get all the benefits of an extended choke tube, including a 25% longer parallel section for tighter and more dense patterns, wrench-less installation, quick removal and helps with muzzle protection. Like all of our tubes Carlson’s Cremator® Series Choke Tubes are made in the U.S.A.,  carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.

NOTE:  Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.

IF OUT OF STOCK AND WANTING TO ORDER A SPECIALTY SNOW GOOSE CHOKE TUBES PLEASE CALL 785-626-3700

Beretta Optima HP 12 Gauge Cremator Non-Ported Snow Goose Choke Tubes
Item# Const. Dia. $61.95
11666 Mid Range .718 ADD
11668 Long Range .708 ADD
Item# Const. Dia. $112.50
11661 2-Pack MR & LR ADD

Click to Return to top of this page



Beretta Optima HP Delta Waterfowl 3-Pack Set

CLOSE-RANGE, MID-RANGE, & LONG RANGE CHOKE TUBES WITH CASE

Our Waterfowl Extended Choke Tubes are manufactured from a tough, high grade stainless steel to withstand steel shot, Hevi Shot, and other heavy tungsten shot. Due to the thin wall design of the Optima HP choke system, we had to use a tougher material in the Mid Range & Long Range tubes so that you don't have to worry about the choke tube swelling and sticking in the shotgun's barrel. These choke tubes feature a 25% longer parallel section in the choke, thus throwing more consistent patterns. Each choke tube is knurled on the end to allow for quick and easy removal. Each choke tube has the constriction and size laser marked on the end and body for easy reference.

Steel shot may be used through these choke tubes with exceptional results. Do not shoot steel shot larger than BB and/or use any steel load faster than 1550 FPS through the Full (Long Range) Choke tube. Slugs, sabots, and rifled slugs are not to be used in any choke constriction tighter than Improved Cylinder. Remember to pattern your shotgun choke tube with the specific shotshell load you are going to be using. Different brands of ammunition throw different patterns from the same choke tube.

This choke is backed by Carlson's lifetime waranty.

Beretta Optima HP 12 Gauge Delta Waterfowl 3-Pack Set
Item# Const. Dia. $229.95
65009 3-Pack .723 .713 .703 ADD

Click to Return to top of this page



Beretta Optima HP Delta Waterfowl Extended Choke Tubes

Our NEW Beretta Optima HP (A-400) Super Steel Choke tubes have been BEEFED up with Carpenter 455 stainless steel (12 GA only), adding more strength to this choke to withstand steel shot and other heavy tungsten shot shells  ammunition.  Due to the thin wall design of the Optima HP choke system, we had to use a tougher material than the 17-4 stainless steel used in our other tubes (20 GA).  By using the new Carpenter 455 material we have manufactured a choke that hunters can now use with Steel, Hevi Shot, and other tungsten shot shells without worrying about the choke tube swelling and sticking in the shotgun’s barrel.  These choke tubes work with all lead shot shells, also.  We offer these New super strong, Choke Tubes in Modified, Improved Modified, and Full choke constrictions

These choke tubes feature a longer parallel section allowing for less flyers and denser patterns over the targeted area.  These choke tubes extend ¾” outside the barrel eliminating barrel damage caused from prolonged use of steel shot.  The longer parallel section allows for use of larger steel shot in tighter choke constrictions.  These choke tubes have a knurled extension and a matte blue finish.  All steel shot can be used in the Modified (Mid Range) and Improved Modified choke tubes, DO NOT use steel faster than 1550 FPS and/or steel shot sizes larger than BB through the Full (Long Range) choke tube.

Beretta Optima HP 12 Gauge Delta Waterfowl Extended Choke Tubes
Item# Const. Dia. $91.95
65014 Modified .713 ADD
65015 Improved Modified .708 ADD
65016 Full .703 ADD

Click to Return to top of this page



Beretta Optima HP Black Cloud Waterfowl Choke Tubes

 

GET OUTSTANDING RESULTS WHEN YOU USE THE KNOCKDOWN POWER OF FEDERAL PREMIUM'S BLACK CLOUD™ AMMUNITION WITH CARLSON'S NEW TITANIUM COATED BLACK CLOUD CHOKE TUBE

Federal's new Black Cloud ammunition features devastating penetration which can now be delivered with unique features that help downrange performance increasing hunter success.

The Extended tube is constructed of a Titanium-coated steel, and comes in Mid Range and Long Range models. The titanium coating helps the uniquely designed FliteControl Wad in the Black Cloud ammunition perform downrange with less build-up in the choke and allows the Flitestopper shot to do its job this increasing your take in the field.

These chokes are specifically designed to get the most performance from Federal's new Black Cloud Ammunition, but perform extremely well with other steel shotshells. The Long Range choke tube should not be used with any steel shot larger than BB or with any steel shot faster than 1550 fps. The Mid Range model can be used with all steel shot sizes.

The Mid Range model can be used with all steel shot sizes, and with ammunition that exceeds 1550 fps. Black Cloud ammunition has been designed to be used with choke tubes that do not use porting or wad stopping devices.

This choke is backed by Carlson's lifetime warranty.

Beretta Optima HP 12 Gauge Black Cloud Waterfowl Choke Tubes
Item# Const. Dia. $106.95
09016 Mid Range .713 ADD
09017 Long Range .703 ADD
Item# Const. Dia. $205.50
09140 2-Pack .713 & .703 ADD

Click to Return to top of this page



Beretta Optima HP Tactical Breecher Muzzle Brake

The New Carlson’s Tactical Muzzle Brake choke tube features a porting designed to reduce recoil significantly.  This new choke tube is manufactured from 17-4 Heat Treated Stainless Steel in Cylinder constriction. 

The Cylinder constriction may be used with ALL shot shells including Lead, Steel, Hevi-Shot, and even slugs! 

The NEW Tactical Choke Tube has a head that extends approximately 2.75” beyond the end of the barrel and features a matte black finish.  The addition of this new choke will not only make any ordinary shotgun look extraordinary, but also significantly reduce recoil allowing for better control of your firearm and quicker follow-up shots.  Perfect for Law Enforcement or Home Defense.  These chokes are proudly made in the USA and feature Carlson’s lifetime warranty!

Beretta Optima HP 12 Gauge Tactical Breecher Muzzle Brake
Item# Const. Dia. $129.95
84180 Cylinder .733 ADD

Click to Return to top of this page



Beretta Optima HP Tactical Muzzle Brake

The New Carlson’s Tactical Muzzle Brake choke tube features a porting designed to reduce recoil significantly.  This new choke tube is manufactured from 17-4 Heat Treated Stainless Steel in Cylinder constriction. 

The Cylinder constriction may be used with ALL shot shells including Lead, Steel, Hevi-Shot, and even slugs! 

The NEW Tactical Choke Tube has a head that extends approximately 2.75” beyond the end of the barrel and features a matte black finish.  The addition of this new choke will not only make any ordinary shotgun look extraordinary, but also significantly reduce recoil allowing for better control of your firearm and quicker follow-up shots.  Perfect for Law Enforcement or Home Defense.  These chokes are proudly made in the USA and feature Carlson’s lifetime warranty!

Beretta Optima HP 12 Gauge Tactical Muzzle Brake
Item# Const. Dia. $119.95
84080 Cylinder .733 ADD

Click to Return to top of this page



Beretta Optima HP Rifled Choke Tubes

These precision Rifled Choke Tubes are manufactured from 304 high stress stainless steel. Each choke tube protrudes .625 to 1.3 inches from the end of the barrel depending upon which type of firearm the choke tube has been specifically designed for. Each choke tube has a right hand rifle twist, which is 1 to 35. Each choke tube has a groove diameter of .730 of an inch in 12 ga. These choke tubes have a matte black finish and carry a lifetime warranty. If you're looking for improved accuracy from a smooth bore barrel these fine choke tubes will improve your groups.

Beretta Optima HP 12 Gauge Rifled Choke Tubes
Item# Const. Dia. $62.50
40080 Rifled ADD

Click to Return to top of this page



Copyrights © 2020 Carlson's Choke Tubes, LLC - All Rights Reserved